Visit Our
YouTube Channel

Grex P635

23 Ga. 1-3/8" Length Headless Pinner

$ 224.95

The only industrial strength pinner offering an adjust-free magazine and a fastener range up to 1-3/8". Designed ideally for finishing and detailed woodworking, the GREX P635 possesses an innovative and patented magazine that eliminates the need to adjust for different fastener lengths.

Features:

Powerful motor penetrates fasteners through the hardest materials.
Compact and lightweight design for improved maneuverability.
Shoots fasteners up to 1-3/8" length easily, even in hardwoods.
Patented design eliminates need to adjust for different fastener lengths.
Double trigger safety prevents accidental firing of tool.
Side loading with mechanism to prevent fasteners from tumbling.
Narrow nose reaches tight areas and corners for detailed trim work.
Removable nose cover provides easy access for clearing jams.
Removable no-mar tip prevents marring of work surface.
Rear exhaust directs exhaust away from you and your workpiece.
Fastener indicator to see when reloading is necessary.
Convenient belt hook for easy carrying of tool.
Quick access magazine storage for wrench and no-mar rubber tip.

Specifications:

Dimensions: 7.75"L x 7.5"H x 2"W (20cm x 19cm x 5cm)
Weight: 2.21 lbs. (1 kgs.)
Operating Pressure: 60 ~ 100 psi (4 ~ 7 bars)
Fastener Type: 23 Gauge Headless Pins
Fastener Range: 3/8" ~ 1-3/8" (10mm ~ 35mm) except 1-1/4" (32mm)
Fastener Capacity: 1 strip (approx. 100 pins)
Air Inlet: 1/4" (6mm) NPT male plug

Applications:

Light wood assembly, Finish and trim work, Molding and decorative trim, Dowel and joint pinning, Mirror and picture frame assembly, Lightweight paneling, External softwood trim, Rattan furniture, Glazing strips, Craft work, Window beading, Display and sign work.

Self-Adjust Magazine

The patented "adjust-free magazine" design first introduced by Grex is the defining feature found in their entire line of headless pinners. Adjustments are unneccessary when using any fastener lengths.

Double Trigger Safety Lock

The double trigger safety lock helps prevent accidental firing of the tool. To use, first pull the secondary trigger with your middle finger, then pull the primary trigger with your index finger just like any other tool.

Fastener Indicator Window

This window on the magazine can show if fasteners are low and when reloading is necessary.

Removable Nose Cover

The nose cover is designed to be conveniently removed to provide easy access to clearing fastener jams. Simply use the hex wrench stored in the quick access storage area to loosen the nose cover screws and then slide off the cover.

Removable No-mar Rubber Tip

Protect your work surfaces with the rubber tip and use the alignment marks to accurately locate the position to drive pins. The rubber tip can be stored in the quick access storage area when not in use for easy access and safe keeping.